Select Calibration Incorporated is a calibration service provider for coordinate measuring machines. Select Calibration Incorporated is certified by the Standards Council of Canada under the Canadian Laboratory Assessment Services (CLAS) program in accordance with ISO/IEC 17025.
This page contains the quality policy, accreditation certificate, scope of accreditation, and sample calibration reports generated by SCI.
Select Calibration Incorporated was established for the sole purpose of providing high end calibration services for coordinate measuring machines, in the shortest time possible, at a competitive cost. It is the policy of Select Calibration Incorporated to continuously improve upon the process of coordinate measuring machine calibration by adopting the latest technology and methodologies from the calibration industry where possible.
Select Calibration Incorporated recognizes the contributions made from those who work in this field. As policy we contribute to the calibration industry by providing information, insight, or guidance whenever possible.
Select Calibration Incorporated, located in Rodney Ontario, having been assessed by the National Research Council of Canada (NRC), under the authority of the Standards Council of Canada (SCC), and found to conform with the requirements of ISO/IEC 17025 and conditions established by SCC, and the NRC Calibration Laboratory Assessment Service (CLAS), and having demonstrated the capability of calibrating measurement instruments ...
Note: The accreditation certificate does not contain the expiry date. See the accreditation scope below for that kind of information.
Download |
The scope of accreditation to ISO/IEC 17025:2017: General Requirements for the Competence of Testing and Calibration Laboratories.
Download |
This scope of calibration capabilities is published by CLAS of the National Research Council of Canada (NRC) in close co-operation with the PALCAN program of the Standards Council of Canada (SCC), Canada's accreditation body for calibration and testing laboratories. The SCC accredits the capability of the named laboratory for being able to perform the listed calibrations at the given Calibration Measurement Capability (see Supplementary Notes C and D) with traceability to the International System of Units (SI) or to standards acceptable to CLAS.
English: | Download |
French: | Download |
Sample ASME B89.4.10360-2:2008 calibration report for coordinate measuring machines.
Download |
Sample ISO/IEC 10360-2:2009 calibration report for coordinate measuring machines.
Download |
Sample strict acceptance report for coordinate measuring machines. This report was created in response to the often asked question of machine accuracy following a calibration. Using the data from the E0 and E150 performance tests a limit is calculated that contains all measurement errors increased by the expanded measurement uncertainty. The limit represents the machine error stated with a level of confidence. Two methods are used for determining the strict acceptance limit and both appear on the report.
Download |
Information about the contents of the calibration reports generated by Select Calibration Incorporated.
Download |